Brake Shoes &/Or Pads: Remove & Replace
WARNING: This page is about the Taurus SHO, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable).
Includes: Repack Wheel Bearings (where applicable).
DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| All | 1.8 | B | ||
| Front | 1.0 | B | ||
| Rear | 1.0 | B | ||
| Combination Procedure: BRAKE HOSE: Replace: | ||||
| Each Additional | 0.2 | B | ||
| One,Front | Includes: Bleed Brakes. | 0.7 | B | |
| One,Rear | Includes: Bleed Brakes. | 0.6 | B | |
| Combination Procedure: CALIPER: Overhaul: | ||||
| One | 1.0 | B | ||
| Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle: | ||||
| 0.5 | B | |||
| Combination Procedure: DISC ROTOR: Remove and Install for Refinishing: NOTE: This operation does not apply to drive axles. If on vehicle refinishing is not possible use appropriate repair operation. | ||||
| Each,Front | 0.4 | B | ||
| Each,Rear | 0.2 | B | ||
| Combination Procedure: DISC ROTOR: Replace: | ||||
| Each | 0.1 | B | ||