Integrated Circuit Display

The integrated circuit display functions and menus listed below can be selected through the SELECT/RESET button by pressing and releasing the SELECT/RESET button to scroll through the menu items.

The base IPC  provides the following information:

• Odometer
• Trip odometer A or B
• Autolamp (if equipped)
• Autolock/unlock (if equipped)

The informational items (trip odometer A, trip odometer B) can be reset by holding the SELECT/RESET button for approximately 2 seconds. The setup items, (system configurable items such as autolamps or autolock/unlock) can be configured by holding the SELECT/RESET button for approximately 2 seconds when the selected menu item is displayed.