Message Center Configuration
The message center has the capability to configure items such as units (English or metric), autolamp delay, to enable/disable a variety of options such as autolock and auto-unlock (if equipped). On configurable items such as autolock and auto-unlock, the message center indicates the appropriate selection (ON/OFF) by bracketing the selection. For example, if the driver selects the autolock feature on, the message would display as follows: AUTOLOCK □ON> OFF. If the driver selects the autolock off, the message would display as follows: AUTOLOCK ON □OFF>. Refer to the Owner's Literature for complete operating instructions.
The full function message center provides the following features:
- Information displays
- Setup displays
- Warning messages
- System check messages
The message center information can be selected through a set of 3 buttons:
- INFO
- SETUP
- RESET