LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> Fusion S, Automatic >> Repair and Diagnosis >> Brakes >> Parking Brake System - Parking Brake & Actuation >> Removal And Installation >> Parking Brake Warning Indicator Switch >> Removal and Installation

Removal and Installation

  1. Remove the floor console. For additional information, refer to REMOVAL AND INSTALLATION - Fushion & Milan, REMOVAL AND INSTALLATION - MKZ .
  2. Disconnect the parking brake warning indicator switch electrical connector.
  3. Remove the parking brake warning indicator switch screw.
  4. Remove the parking brake warning indicator switch.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals