Brake Fluid Reservoir: Material
MATERIAL SPECIFICATIONS TABLE
| Item | Specification |
|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) | WSS-M6C62-A or WSSM6C65-A1 |
2.5L Non-Hybrid
NOTE:
Automatic transmission shown in illustration, manual transmission similar.
Fig 1: Identifying Brake Fluid Reservoir Replacement Components With Torque Specifications (2.5L Non-Hybrid)
ITEM DESCRIPTION TABLE
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Brake fluid level warning switch electrical connector (part of 14290) |
| 2 | 2B176 | Brake fluid reservoir pin bolt |
| 3 | 2L074 | Brake fluid reservoir seal (2 required) |
| 4 | 2C246 | Brake fluid reservoir |
2.5L Hybrid, 3.0L and 3.5L
Fig 2: Identifying Brake Fluid Reservoir Replacement Components With Torque Specifications (2.5L Hybrid, 3.0L & 3.5L)
ITEM DESCRIPTION TABLE
| Item | Part Number | Description |
|---|---|---|
| 1 | W520111 | Brake fluid remote reservoir nuts (2 required) |
| 2 | 2K478 | Brake fluid remote reservoir |
| 3 | - | Spring clamp (part of 2K478) |
| 4 | - | Brake fluid reservoir hose (part of 2K478) |
| 5 | - | Brake fluid level warning switch electrical connector (part of 14290) |
| 6 | - | Spring clamp (part of 2K478) |
| 7 | 2B176 | Brake fluid reservoir pin bolt |
| 8 | 2K478 | Brake fluid reservoir |
| 9 | 2L074 | Brake fluid reservoir seals (2 required) |