LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> Focus SEL, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal And Installation >> Instrument Cluster Finish Panel >> Removal and Installation

Removal and Installation

  1. Lower the steering wheel.
  2. Remove the upper steering column shroud.
    • Lift the upper steering column shroud upward to release the upper steering column shroud retaining clips.
  3. Remove the 2 instrument cluster finish panel screws.
  4. Remove the instrument cluster finish panel.
    • Pull the instrument cluster finish panel toward the center of the vehicle.
  5. To install, reverse the removal procedure.
    • Make sure to align the trim panel retaining clips to the adjacent retaining clip holes.
scientia non olet · About LEMON Manuals