LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> Focus S, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 759 (Parking Brake System & Actuation - F150 & Mark LT) >> Removal And Installation >> Parking Brake Warning Indicator Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, refer to GENERATOR AND REGULATOR article.
  2. Disconnect the parking brake warning indicator switch electrical connector.
  3. Remove the parking brake warning indicator switch screw and the switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals