LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> Explorer AWD V8-4.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Accessory Drive Belt Tensioner

Accessory Drive Belt Tensioner




Accessory Drive Belt Tensioner - 4.6L (3V)

Removal and Installation

1. Remove the air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.

2. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt.





3. Remove the bolts and the accessory drive belt tensioner.
- To install, tighten to 25 Nm (18 lb-ft).

4. To install, reverse the removal procedure.
- For correct belt routing, refer to Accessory Drive Description and Operation, Accessory Drive Belt Routing, Front End Accessory Drive (FEAD) - 4.6L (3V) in the Description and Operation.

scientia non olet · About LEMON Manuals