Symptom Chart

SYMPTOM CHART

Condition	Possible Sources	Action
All dimmable illumination is inoperative	Wiring, terminals or connectors Instrument panel dimmer switch Smart Junction Box (SJB)	GO to PINPOINT TEST A .
All dimmable illumination does not dim	Wiring, terminals or connectors Instrument panel dimmer switch SJB	GO to PINPOINT TEST B .
All dimmable switch illumination is inoperative	Fuse Wiring, terminals or connectors SJB	GO to PINPOINT TEST C .
All dimmable switch illumination is always on	Wiring, terminals or connectors SJB	GO to PINPOINT TEST D .
The steering wheel switch illumination is inoperative	Wiring, terminals or connectors Steering wheel switch Steering wheel harness Clockspring	GO to PINPOINT TEST E .
The window control switch illumination is inoperative	Wiring, terminals or connectors Window control switch	For MKX, GO to PINPOINT TEST F . For Edge, CHECK the operation of the power windows. If the power windows operate correctly, INSTALL a new window control switch. REFER to GLASS, FRAMES AND MECHANISMS . TEST the system for normal operation. If the power windows do not operate correctly, REFER to GLASS, FRAMES AND MECHANISMS .
One or more switch illumination is inoperative	Wiring, terminals or connectors Floor shifter LH rear heated seat switch (if equipped) RH rear heated seat switch (if equipped) Manual temperature control (if equipped) Message center switch (if equipped) Memory set switch (MKX) Window control switches (MKX) Headlamp switch Hazard/passenger air bag disable/traction control switch (if equipped) Door lock control switches Power liftgate release switch Roof opening panel switch (if equipped)	GO to PINPOINT TEST F .
All network-controlled illumination does not dim	Medium Speed Controller Area Network (MS-CAN) SJB	CARRY OUT the network test. If the scan tool responds with no communication with the SJB , REFER to MODULE COMMUNICATIONS NETWORK . If the scan tool communicates with the SJB . REFER to MULTIFUNCTION ELECTRONIC MODULES . TEST the system for normal operation.
The Instrument Cluster (IC) illumination is inoperative/does not dim	IC	CARRY OUT the network test. If the scan tool responds with no communication with the IC , REFER to MODULE COMMUNICATIONS NETWORK . If the scan tool communicates with the IC, INSTALL a new IC . REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES . TEST the system for normal operation.
The Audio Control Module (ACM) illumination is inoperative/does not dim	ACM	CARRY OUT the network test. If the scan tool responds with no communication with the ACM , REFER to MODULE COMMUNICATIONS NETWORK . If the scan tool communicates with the ACM , INSTALL a new ACM . REFER to INFORMATION AND ENTERTAINMENT SYSTEMS . TEST the system for normal operation.
The Rear Entertainment Module (RETM) illumination is inoperative/does not dim	RETM	CARRY OUT the network test. If the scan tool responds with no communication with the RETM , REFER to MODULE COMMUNICATIONS NETWORK . If the scan tool communicates with the RETM , INSTALL a new RETM . REFER to INFORMATION AND ENTERTAINMENT SYSTEMS . TEST the system for normal operation.
The HVAC module illumination is inoperative/does not dim	HVAC module	CARRY OUT the network test. If the scan tool responds with no communication with the HVAC module, REFER to MODULE COMMUNICATIONS NETWORK . If the scan tool communicates with the HVAC module, INSTALL a new HVAC module. REFER to CLIMATE CONTROL . TEST the system for normal operation.