Network Messaged Inputs

Module messaging has increased dramatically over time and is becoming the standard for sending and receiving information required to operate the IC  . The IC  is a gateway module. As a gateway module, the IC  receives and sends information to other modules over both the High Speed Controller Area Network (HS-CAN) and the Medium Speed Controller Area Network (MS-CAN) that may not necessarily be used for IC  gauge or indicator outputs.

For a complete list of all module messages along with the message origination sources, refer to MODULE COMMUNICATIONS NETWORK .

Some of the system status and information messages that the IC  requires from other modules to operate the gauges and indicators are as follows:

• Vehicle speed
• Engine RPM
• Engine Coolant Temperature (ECT)
• ABS
• Traction control status
• All-Wheel Drive (AWD)
• Transmission range status
• Overdrive (O/D) status
• Tire Pressure Monitoring System (TPMS)
• Supplemental Restraint System (SRS)
• Brake fluid level
• Parking brake status
• Electronic Throttle Control (ETC)