Service Procedure Displays

The message center displays warning messages that indicate a system state during repair procedures related to the TPMS  . The displayed warning messages are as follows:

• TRAIN MODE: TRAIN xx TIRE
• TIRE TRAINING MODE COMPLETE
• TIRE NOT TRAINED - REPAIR

The message center displays warning messages that indicate a system state during repair procedures related to the compass display. The displayed warning messages are as follows:

• RESET FOR ZONE
• SETUP ZONE XX
• RESET FOR CAL
• CIRCLE SLOWLY TO CALIBRATE
• CALIBRATION COMPLETE

The message center displays the IKT KEY COULD NOT PROGRAM warning message to indicate a problem programming the Integrated Keyhead Transmitter (IKT).