LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1398 (Seat System - Seating) >> Diagnostic Tests >> Seats >> Pinpoint Tests >> Pinpoint Test M: The Heated Seat is Inoperative - Driver, Does Not Operate in High >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

The heated seat is activated when the heated seat switch sends a ground signal to the heated seat module input from circuit 1020 (DG/VT) to activate hi heat or off. The system will remain on until the module times-out or is switched off.

This pinpoint test is intended to diagnose the following: