LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1371 (Automatic Transmission) >> In-Vehicle Servicing >> 2-3 Accumulator >> Installation

2-3 Accumulator: Installation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 2-3 accumulator assembly.
    1. Install the accumulator piston.
    2. Install the accumulator piston spring.
    3. Install the accumulator spring retainer.
    2. Fig 1: Installing 2-3 Accumulator Assembly
    GF0003537Courtesy of FORD MOTOR CO.
  2. Install the main control valve body. For additional information, refer to Main Control Valve Body .
    3. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and procedures, refer to FIRE SUPPRESSION SYSTEM article. Failure to follow these instructions may result in serious personal injury.
  3. If equipped with a fire suppression system, repower the system.
scientia non olet · About LEMON Manuals