Transmission Fluid Cooler: Removal
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
- Remove the lower air deflector.
- Remove and discard the 2 transmission fluid cooler-to-hose clamps.
- Remove the transmission fluid cooler inlet hose from the cooler.
- Remove the transmission fluid cooler outlet hose from the cooler.
- Remove the 2 transmission fluid cooler retaining screws.
- Lift and remove the transmission fluid cooler from the retaining pockets.