LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1331 (Automatic Transmission Cooler - Transaxle/Transmission Cooling) >> Removal And Installation >> Transmission Fluid Cooler Hoses >> Installation

Transmission Fluid Cooler Hoses: Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transmission fluid cooler hoses into the retainer.
  2. Connect the transmission fluid cooler hoses to the cooler.
  3. Install 2 new transmission fluid cooler hose-to-cooler clamps.
  4. Connect the transmission fluid cooler hoses to the cooler tubes.
  5. Install the transmission fluid cooler tube quick connect secondary latches.
  6. Fill the transmission with clean automatic transmission fluid and verify correct operation.
  7. Install the lower air deflector.
scientia non olet · About LEMON Manuals