Spark Plugs: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: It is important to twist the spark plug wire boots while pulling upward to avoid possible damage to the spark plug wire.

NOTE: Spark plug wires must be connected to the correct spark plug.

Using the special tool, remove the spark plug wires from the spark plugs using a twisting motion.

Fig 1: Removing Spark Plug Wire From Spark Plug Using Special Tool (303-106)

Courtesy of FORD MOTOR CO.

CAUTION: Only use hand tools when removing or installing the spark plugs, or damage may occur to the cylinder head or spark plug.

NOTE: Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.

Remove the 6 spark plugs.