Crankshaft Rear Seal with Retainer Plate: Notes
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Impact Slide Hammer | 100-001 (T50T-100-A) | |
| Installer, Crankshaft Rear Oil Slinger | 303-517 (T95P-6701-CH) | |
| Installer, Crankshaft Rear Seal | 303-518 (T95P-6701-DH) | |
| Installer, Crankshaft Rear Seal | 303-516 (T95P-6701-BH) | |
| Remover, Crankshaft Rear Oil Slinger | 303-514 (T95P-6701-AH) | |
| Remover, Crankshaft Rear Seal | 303-519 (T95P-6701-EH) |
Material
| Item | Specification |
|---|---|
| Gasket Maker TA-16 |
WSK-M2G348-A5 |
| Motorcraft Metal Surface Prep ZC-31 |
- |
| Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent |
WSS-M2C930-A |
| Silicone Gasket and Sealant TA-30 |
WSE-M4G323-A4 |
| Silicone Gasket Remover ZC-30 |
- |