LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1324 (Engine Mechanical - 4.0L SOHC) >> In-Vehicle Servicing >> Timing Drive Components - Hydraulic Chain Tensioner, RH >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the RH hydraulic chain tensioner.
    • To install, tighten to 44 Nm (32 lb-ft).
  2. Remove and discard the washer.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals