Exhaust Manifold - RH: Removal
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
- Remove the 2 catalytic converter-to-exhaust manifold nuts.
- Discard the nuts.
- Remove the nuts, the RH exhaust manifold and the gasket.
- Discard the nuts and gasket.
- Clean and inspect the RH exhaust manifold. For additional information, refer to ENGINE SYSTEM - GENERAL INFORMATION .
- Remove and discard the 6 RH exhaust manifold studs.