LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1324 (Engine Mechanical - 4.0L SOHC) >> In-Vehicle Servicing >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the new front seal with clean engine oil.
  1. Using the Front Cover Aligner and Crankshaft Vibration Damper Installer, install a new crankshaft front seal.
    2. Fig 1: Identifying Special Tools (303-102, 303-093) & Crankshaft Front Oil Seal
    GF0009317Courtesy of FORD MOTOR CO.
  2. Install the crankshaft pulley. For additional information, refer to Crankshaft Pulley .
scientia non olet · About LEMON Manuals