LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1322 (Engine Mechanical - 5.4L (4V)) >> In-Vehicle Servicing >> Oil Pump Screen and Pickup Tube >> Removal

Oil Pump Screen and Pickup Tube: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Remove the oil pan. For additional information, refer to Engine Lubrication Components - Exploded View  and Oil Pan .
  3. Remove the 3 bolts and the oil pump screen and pickup tube assembly.
    • Discard the O-ring seal.
    4. Fig 1: Identifying Bolts, Oil Pump Screen & Pickup Tube Assembly
    GF0000456Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals