LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1322 (Engine Mechanical - 5.4L (4V)) >> In-Vehicle Servicing >> Oil Cooler >> Removal

Oil Cooler: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Drain the engine cooling system. For additional information, refer to ENGINE COOLING .
  3. Remove the generator. For additional information, refer to GENERATOR AND REGULATOR .
    4. NOTE: If metal or aluminum material is present in the oil cooler, mechanical concerns exist. Failure to correct these concerns may cause engine failure. To diagnose mechanical concerns, refer to ENGINE SYSTEM - GENERAL INFORMATION .
  4. Remove the 6 bolts and the oil cooler.
    • Discard the gaskets.
    • Inspect the oil cooler.
scientia non olet · About LEMON Manuals