LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1322 (Engine Mechanical - 5.4L (4V)) >> In-Vehicle Servicing >> Flywheel >> Installation

In-Vehicle Servicing: Flywheel: Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the flywheel on the crankshaft pilot and start the 8 flywheel bolts.
  2. Tighten the flywheel bolts evenly in the sequence shown to fully seat the flywheel on the crankshaft pilot.
    • Tighten to 80 Nm (59 lb-ft).
    3. Fig 1: Tightening Flywheel Bolts Evenly In Sequence
    GF0046356Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals