LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1314 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Output Shaft Ring Gear and Hub Shaft Assembly >> Assembly

Output Shaft Ring Gear and Hub Shaft Assembly: Assembly

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the output shaft ring gear onto the output shaft hub.
    1. Install the output shaft ring gear.
    2. Install the retaining ring.
    2. Fig 1: Installing Output Shaft Ring Gear Onto Output Shaft Hub
    GF0015645Courtesy of FORD MOTOR CO.
  2. Install the seal.
    3. Fig 2: Identifying Seal
    GF0015643Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals