LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1310 (Instrument Panel & Console) >> Removal And Installation >> Instrument Panel Center Finish Panel >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor console. For additional information, refer to Console - Floor .
  2. Remove the 6 screws and remove the instrument panel center finish panel.
    • Disconnect the electrical connectors.
    3. NOTE: Be sure that all climate control assembly electrical connectors are securely fastened before installing the center instrument panel finish panel.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals