LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1296 (Convertible Top System) >> Removal And Installation >> Convertible Top Headliner >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the convertible top stay pad. For additional information, refer to Stay Pad .
  2. Remove the sail panel clips from the convertible top frame.
  3. Remove the 2 sail panel fasteners (1 each side) from the convertible top frame No. 5 bow.
  4. Remove the 2 listing strap rivets (1 each side) from the rear rail.
  5. Remove the 2 headliner mounting brackets (1 each side) from the rear rail.
  6. Remove the 3 headliner fasteners from the convertible top frame No. 4 bow.
  7. Remove the 6 fasteners attaching the headliner tracks to the convertible top frame No. 2 and No. 3 bows (3 each bow).
  8. Remove the 2 listing strap fasteners (1 each side) from the convertible top frame between the convertible top frame No. 2 and No. 3 bows.
  9. Remove the 6 headliner fasteners from front corners of the convertible top frame.
  10. Remove the headliner from the convertible top frame.
  11. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals