Removal And Installation
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the luggage compartment lid trim panel.
- Disconnect the luggage compartment lid latch actuator cable from the luggage compartment lid lock cylinder.
- If equipped, disconnect the luggage compartment lid lock cylinder electrical connector.
- Remove the 2 bolts and the luggage compartment lid lock cylinder.
- To install, tighten to 9 Nm (80 lb-in).
- To install, reverse the removal procedure.
- Lubricate the luggage compartment lid lock cylinder after installation.