LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1288 (Information System & Entertainment System) >> Removal And Installation >> Antenna Lead-In Cable >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Audio Control Module (ACM). For additional information, refer to Audio Control Module (ACM) .
  2. Lower the glove compartment door.
  3. Disconnect the antenna inline connector.
  4. Disconnect the pin-type retainers and remove the antenna lead-in cable.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals