Speaker Walk-Around Test
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To enter the speaker walk-around test or ACM self-diagnostic mode, the audio system must be on and in radio tuner mode.
- To enter the speaker walk-around test, simultaneously press and hold the preset buttons 3 and 6.
- The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the ACM in the following sequence: RF, LF, LR, RR, and SUBWOOFER.
- To exit the speaker walk-around test, turn the key to OFF, turn the audio system off, or press preset button 1 for diagnostics.