LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1285 (Electronic Engine Control) >> Removal And Installation >> Supercharger Bypass Vacuum Actuator >> Removal

Supercharger Bypass Vacuum Actuator: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the throttle body. For additional information, refer to FUEL CHARGING AND CONTROLS - 5.4L (4V) .
  2. Disconnect the 2 supercharger (SC) bypass vacuum actuator vacuum connectors.
  3. Remove the 2 SC bypass vacuum actuator bolts.
  4. Rotate the SC bypass vacuum actuator to align the actuator rod with the slot in the linkage, and remove the actuator.
    5. Fig 1: Locating Actuator Rod
    GF0000716Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals