LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1279 (Rear Disc Brake System) >> Removal And Installation >> Rear Disc Brake Shield >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake disc. For additional information, refer to Brake Disc .
  2. Remove the 3 bolts and the brake disc shield.
    • To install, tighten to 20 Nm (15 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals