Section 1266 (Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear): Specifications: Material
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification | Fill Capacity |
|---|---|---|
| Additive Friction Modifier XL-3 (US); CXL-3 (Canada) |
EST-M2C118-A | 118 ml (4 oz.) |
| High Temperature Nickel Anti-Seize Lubricant XL-2 (US); CXG-2-B (Canada) |
ESE-M12A4-A | - |
| Motorcraft High Contrast Hypoid Gear Marking Compound XG-14 |
- | - |
| Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant XY-75W140-QL (US); CXY-75W140-1L (Canada) |
WSL-M2C192-A | 1.89-2.01L (4.0-4.25 pt) to the bottom of the fill hole with the axle at ride height |
| Premium Long-Life Grease XG-1-C or XG-1-K (US); CXG-1-C (Canada) |
ESA-M1C75-B | - |
| Silicone Gasket and Sealant TA-30 |
WSE-M4G323-A4 | - |
| Stud and Bearing Mount TA-27 |
WSK-M2G349-A1 | - |
| Threadlock and Sealer TA-25 |
WSK-M2G351-A5 | - |