DTC P2111: - Throttle Actuator Control (TAC) System - Stuck Open

DTC P2111: - THROTTLE ACTUATOR CONTROL (TAC) SYSTEM - STUCK OPEN

Description:	This powertrain control module (PCM) fault status indicates the throttle plate is at a greater angle than commanded.
Possible Causes:	Binding throttle body, stuck open TAC motor circuit open TAC motor circuits are cross-wired TAC motor harness circuits are shorted together Damaged PCM
Diagnostic Aids:
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to Pinpoint Test DV .