DTC P0345: - Camshaft Position Sensor A Circuit (Bank 2)
DTC P0345: - CAMSHAFT POSITION SENSOR A CIRCUIT (BANK 2)
| Description: | The test fails when the powertrain control module (PCM) can no longer detect the signal from the camshaft position (CMP) sensor on bank 2. | ||
| Possible Causes: | See the possible causes for DTC P0340. | ||
| Diagnostic Aids: | See the diagnostic aids for DTC P0340. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DR . | ||