DTC P0315 - Crankshaft Position System Variation Not Learned
DTC P0315 - CRANKSHAFT POSITION SYSTEM VARIATION NOT LEARNED
| Description: | The powertrain control module (PCM) is unable to learn and correct for mechanical inaccuracies in crankshaft pulse wheel tooth spacing. This DTC disables the misfire monitor. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Requires visual inspection of the CKP sensor and the crankshaft pulse wheel teeth for damage. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | - | GO to Pinpoint Test HD . |