DTC P0041: - Oxygen Sensor Signals Swapped Bank 1 Sensor 2/Bank 2 Sensor 2
DTC P0041: - OXYGEN SENSOR SIGNALS SWAPPED BANK 1 SENSOR 2/BANK 2 SENSOR 2
| Description: | The heated oxygen sensor (HO2S) monitor determines if the HO2S signal response for a fuel shift corresponds to the correct engine bank. The test fails when there is no response from the HO2S being tested. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Connect the HO2S connector to the correct bank. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | GO to Pinpoint Test DW . | - |