LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Taurus X SEL, FWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake System >> Removal And Installation >> Rear Disc Brake Shield >> Removal

Rear Disc Brake Shield: Removal

  1. Remove the brake disc. For additional information, refer to Brake Disc .
  2. Remove the 3 bolts and the brake disc shield.
    • To install, tighten to 14 Nm (10 lb-ft).
  3. To install, reverse the removal procedure.