Tail Lamp: Service and Repair

Rear Lamp Assembly

Taurus, Sable










Taurus X









Removal and Installation

Taurus, Sable

1. Position the luggage compartment side trim panel aside.

2. Remove the 3 nuts and the rear lamp assembly.
- Separate the bulb holders from the rear lamp assembly.

- To install, tighten to 6 Nm (53 lb-in).

Taurus X

3. Remove the 2 screws and the rear lamp assembly.
- Separate the bulb holders from the rear lamp assembly.

All vehicles

4. To install, reverse the removal procedure.