LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Ranger 2WD L4-2.3L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Idler Pulley >> Service and Repair >> Accessory Drive Belt Idler Pulley

Accessory Drive Belt Idler Pulley




Accessory Drive Belt Idler Pulley

Removal and Installation

Vehicles equipped with a 4.0L SOHC engine

1. Remove the air cleaner outlet pipe.

All vehicles

2. Rotate the accessory drive belt tensioner counterclockwise and remove the accessory drive belt.

3. Remove the belt idler pulley assembly.
- To install, tighten the 2.3L belt idler pulley assembly to 25 Nm (18 lb-ft).

- To install, tighten the 4.0L belt idler pulley assembly to 47 Nm (35 lb-ft).

4. To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals