Section 800 (Automatic Transmission - 5R110W -- F250-F550 Super Duty): Disassembly: Transmission: Notes
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Slide Hammer | 100-001 (T50T-100-A) | |
| Roll Pin Set | 211-S060 (T78P-3504-N) | |
| Socket, Output Shaft Locknut | 307-458 | |
| Compressor, Clutch Spring | 307-015 (T65L-77515-A) | |
| Aligner, Clutch Spring Compressor | 307-455 | |
| Remover, Torque Converter Fluid Seal | 307-309 (T94P-77001-BH) (used with 100-001) | |
| Remover, Transmission Extension Housing Seal (used with 307-309) | 307-454 | |
| Remover, Output Shaft Seal/Housing | 307-460 | |
| Fixture Handle, Coast Clutch | 307-384 | |
| Fixture Body, Coast Clutch | 307-385 | |
| Remover, Transmission Fluid Pump | 307-221 (T89T-70010-A) | |
| Adapter for 303-224 (Handle) | 205-153 (T80T-4000-W) | |
| Retaining Ring Pliers | 307-343 (T95P-77001-AHR) | |
| Loading Fixture, Clutch | 307-S383 | |
| Handle, Torque Converter | 307-091 (T81P-7902-C | |
| Remover, Pilot Bearing | 308-001 (T58L-101-B) | |
| Retainer, Torque Converter | 307-346 (T97T-7902-A) |