LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Fusion S, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 800 (Automatic Transmission - 5R110W -- F250-F550 Super Duty) >> Diagnostic Tests >> Output State Control (OSC) Mode >> Procedure

Output State Control (OSC) Mode: Procedure

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The OSC has 2 modes of operation for the transmission:

In order to operate the OSC in the DRIVE Mode, no diagnostic trouble codes (DTCs) related to the transmission range (TR) position sensor, turbine shaft speed (TSS) sensor, output shaft speed (OSS) sensor or the SSPC-A (coast clutch), SSPC-B (overdrive clutch), SSPC-C (intermediate clutch), SSPC-D (direct clutch), SSPC-E (low reverse) and PC-A (line pressure) solenoids may be present. Carry out the KOEO on-demand self test and retrieve continuous codes to identify any codes that are present.

scientia non olet · About LEMON Manuals