DTC P0107: - Manifold Absolute Pressure (Map)/Barometric Pressure (BARO) Sensor Low

DTC P0107: - MANIFOLD ABSOLUTE PRESSURE (MAP)/BAROMETRIC PRESSURE (BARO) SENSOR LOW

Description:	MAP sensor operating voltage is below the minimum calibrated parameter of 0.024 volts.
Possible Causes:	Open in the circuit, or short to ground VREF circuit open, or short to ground Damaged MAP sensor
Diagnostic Aids:	The VREF voltage should be between 4.0 and 6.0 volts.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to Pinpoint Test DM .