LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Cooler - Transaxle/Transmission Cooling >> Diagnosis And Testing >> Transaxle Cooling >> Inspection and Verification

Inspection and Verification

NOTE: The use of any transmission fluid other than what is recommended for this transaxle will cause transaxle damage. Refer to the MATERIAL  specification and/or the transmission fluid level indicator for the correct fluid. Use only clean transmission fluid designated for this transaxle and torque converter being serviced.
NOTE: Do not mix MERCON® V or MERCON® LV transmission fluid. This may cause erratic shift feel, erratic shift timing and/or transmission failure.
NOTE: Transmission fluid application:
  • Early build vehicles require MERCON® V
  • Late build vehicles require MERCON® LV
  1. Verify the customer concern by operating the vehicle to duplicate the condition.
  2. If the inspection reveals obvious concern(s) that can be readily identified, repair as necessary.
  3. Install new components if a transmission fluid leak is found in any of the transaxle cooling components.
  4. If the concern(s) remains after the inspection, determine the symptom(s). GO to SYMPTOM CHART - TRANSAXLE COOLING  or GO to SYMPTOM CHART - NVH .