Removal And Installation: Clockspring: Removal
NOTE:
The air bag warning indicator illuminates when the correct Restraints Control Module (RCM) fuse is removed and the ignition is ON.
NOTE:
The Supplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.
- Depower the SRS . For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING .
- Remove the driver air bag module. For additional information, refer to DRIVER AIR BAG MODULE .
- Remove the steering wheel. For additional information, refer to STEERING COLUMN .
- Disconnect the steering wheel rotation sensor electrical connector.
- Remove the 2 screws and steering wheel rotation sensor.
- Disconnect the clockspring electrical connector.
- Remove the 2 screws and clockspring.