Safety Canopy® Module
WARNING:
Anytime the Safety Canopy® or side air curtain module has deployed, a new headliner and new A-, B- and C-pillar upper trim panels and attaching hardware must be installed. Remove any other damaged components and hardware and install new components and hardware as needed. Failure to follow these instructions may result in the Safety Canopy® or side air curtain module deploying incorrectly and increases the risk of serious personal injury or death in a crash.
The Safety Canopy® module:
- will deploy upon receiving a flow of current from the RCM initiated by the side impact sensors and internal RCM circuitry when a side impact or vehicle rollover condition is detected.
- is mounted above the headliner.
- attaches from the A-pillar frame to the C-pillar frame.
- cannot be interchanged from side to side.