Prove Out Procedure

Turn the ignition from the OFF to the ON position and visually monitor the air bag warning indicator with all SRS  components connected. The IC  module will illuminate the air bag warning indicator continuously for approximately 6 seconds and then turn off. If an SRS  fault is present, the air bag warning indicator will:

• fail to light.
• remain lit continuously.
• flash.

The air bag warning indicator may not illuminate until approximately 30 seconds after the ignition has been turned from the OFF to the ON position. This is the time required for the RCM  to complete the testing of the SRS  . If the air bag warning indicator is inoperative and an SRS  fault exists, a chime will sound in a pattern of 5 sets of 5 beeps. If this occurs, the air bag warning indicator will need to be repaired before diagnosis can continue.