| B1013 |
- |
Occupant Classification System Calibration Fault |
Go To PINPOINT TEST B . |
| B1231 |
13 |
Event Threshold Exceeded |
This DTC indicates the vehicle has been involved in a collision that required deployment. INSTALL a new passenger seat track with OCS
weight sensor bolts. REFER to
SEATING
and INSPECTION AND REPAIR AFTER A SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPLOYMENT . |
| B1317 |
Continuous |
Battery Voltage High |
Go To PINPOINT TEST E . |
| B1318 |
Continuous |
Battery Voltage Low |
Go To PINPOINT TEST E . |
| B1342 |
16 |
ECU is Faulted |
Go To PINPOINT TEST F . |
| B2290 |
16 |
Occupant Classification System Fault |
Go To PINPOINT TEST I . |
| B229B |
16 |
Occupant Classification System Obstruction |
NOTE:
If no on-demand or continuous DTC is present in the RCM
and DTC B229B is only present in the OCSM
as continuous, RESOLVE and CLEAR all OCSM
DTCs and PROVE OUT the Supplemental Restraint System (SRS). Go To PINPOINT TEST J . |
| C1941 |
- |
Zero Seat Weight Test Failure |
Can only be reported when carrying out Occupant Classification Sensor (OCS) System Zero Seat Weight. REFER to OCCUPANT CLASSIFICATION SENSOR (OCS) SYSTEM ZERO SEAT WEIGHT TEST . |
| U0100 |
14 |
Lost Communication With PCM |
REFER to
MODULE COMMUNICATIONS NETWORK
to diagnose the communication concern. |
| U0151 |
14 |
Lost Communication With Restraints Control Module |
REFER to
MODULE COMMUNICATIONS NETWORK
to diagnose the communication concern. |
| U2023 |
14 |
Fault Received From External Node |
DTC is set when a module receives invalid network data from another module with a faulted input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. REFER to
MULTIFUNCTION ELECTRONIC MODULES
for a list of all DTCs. |
| U2050 |
Continuous Lamp |
No Application Present |
INSTALL a new OCSM
. REFER to OCCUPANT CLASSIFICATION SYSTEM MODULE (OCSM) - MANUAL SEAT TRACK or OCCUPANT CLASSIFICATION SYSTEM MODULE (OCSM) - POWER SEAT TRACK . |
| U2051 |
Continuous Lamp |
One or More Calibration Files Missing/Corrupt |
INSTALL a new OCSM
. REFER to OCCUPANT CLASSIFICATION SYSTEM MODULE (OCSM) - MANUAL SEAT TRACK or OCCUPANT CLASSIFICATION SYSTEM MODULE (OCSM) - POWER SEAT TRACK . |