LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Climate Control System >> Removal And Installation >> Register - Passenger Side >> Removal and Installation

Removal and Installation

  1. Remove the RH instrument panel side finish panel.
    Fig 1: Locating RH Instrument Panel Side Finish Panel
    G06064746Courtesy of FORD MOTOR CO.
  2. Release the 2 glove compartment bumpers and lower the glove compartment.
    Fig 2: Locating Glove Compartment Bumpers
    G06064747Courtesy of FORD MOTOR CO.
  3. Working through the RH instrument panel end panel opening, remove the RH demister duct screw.
    Fig 3: Locating RH Demister Duct Screw
    G06064760Courtesy of FORD MOTOR CO.
  4. Release the 4 passenger side register clips and remove the register.
  5. To install, reverse the removal procedure.