LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Climate Control System >> Removal And Installation >> Register - Driver Side >> Removal and Installation

Removal and Installation

  1. Remove the 3 steering column opening trim panel screws.
  2. Detach and remove the steering column opening trim panel.
  3. Remove the LH instrument panel side finish panel.
  4. Release the 7 clips and remove the driver side register.
    • Disconnect the headlamp switch electrical connector.
  5. To install, reverse the removal procedure.