LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Climate Control System >> Removal And Installation >> Clutch and Clutch Field Coil >> Removal

Clutch and Clutch Field Coil: Removal

  1. Remove the A/C compressor. For additional information, refer to AIR CONDITIONING (A/C) COMPRESSOR .
  2. Remove the A/C clutch disc and hub bolt.
    1. Using the Compressor Clutch Holding Tool, hold the A/C clutch disc and hub.
    2. Remove the A/C clutch disc and hub bolt.
      Fig 1: Removing A/C Clutch Disc And Hub Bolt
      G06064733Courtesy of FORD MOTOR CO.
  3. Remove the A/C clutch disc and hub.
  4. Remove the A/C clutch disc and hub spacer(s).
  5. Remove the A/C compressor pulley snap ring.
    6. NOTE: Do not use air tools. Damage to the Air Conditioning (A/C) clutch pulley or A/C compressor may result.
  6. Remove the A/C compressor pulley.
    1. Install the Compressor Pulley Remover.
    2. Using the Compressor Pulley Remover, remove the A/C compressor pulley.
      Fig 2: Removing A/C Compressor Pulley
      G06064734Courtesy of FORD MOTOR CO.
  7. Remove the A/C clutch field coil snap ring.
  8. Remove the A/C clutch field coil electrical connector bracket screw.
  9. Remove the A/C clutch field coil.
scientia non olet · About LEMON Manuals